WalkInReady

Learn the Material

The whole pool in publication order, answers marked. Nothing here is scored and nothing changes your study statistics.

Notice: You have access to 114 of 561 questions in this course. You can subscribe later for only $10/mo. to unlock the entire course.

GS — General Science

77 questions · 15 on the exam · 61 held back

Practice

77 questions

GS001

Which broad cell group lacks a membrane-bound nucleus as a defining feature?

  1. AA prokaryote
  2. BA eukaryote
  3. CA plant cell
  4. DAn animal cell
Why

Prokaryotes lack a membrane-bound nucleus; eukaryotes have one as part of their basic cell structure.

GS002

Which cell part generates most of the chemical energy a cell needs?

  1. ARibosomes
  2. BMitochondria
  3. CNucleus
  4. DCell membrane
Why

Mitochondria generate most of the cell's chemical energy, stored as ATP.

GS003

Proteins are made (synthesized) at which cell structure?

  1. AMitochondrion
  2. BNucleus
  3. CRibosome
  4. DLysosome
Why

The ribosome reads messenger RNA and joins amino acids into proteins: it is the site of protein synthesis.

GS004

Which structure controls what enters and leaves a cell?

  1. ANucleus
  2. BRibosome
  3. CMitochondrion
  4. DCell membrane
Why

The cell membrane (plasma membrane) is semipermeable and regulates what enters and exits the cell.

GS005

The shape of a DNA molecule is called a

  1. Adouble helix
  2. Bsingle strand
  3. Ctriple spiral
  4. Dflat sheet
Why

DNA is two linked strands wound around each other like a twisted ladder: a double helix.

GS006

Which of these is one of the four bases found in DNA?

  1. AUracil
  2. BThymine
  3. CGlucose
  4. DGlycine
Why

The four DNA bases are adenine, cytosine, guanine and thymine. Uracil replaces thymine in RNA; glucose is a sugar and glycine is an amino acid.

GS007

How many chromosomes are in a normal human body cell?

  1. A23
  2. B44
  3. C46
  4. D92
Why

Humans have 22 pairs of numbered chromosomes plus one pair of sex chromosomes: 46 in all (23 pairs).

GS008

Under complete dominance, when one allele masks the effect of another, the expressed allele is called

  1. Arecessive
  2. Bmutant
  3. Chaploid
  4. Ddominant
Why

In complete dominance, the expressed allele masks the effect of the recessive allele.

GS009

For a recessive trait caused by a gene on a chromosome other than X or Y, a person must inherit

  1. Atwo copies of the recessive allele
  2. Bone copy of the recessive allele
  3. Cone dominant and one recessive allele
  4. Dtwo copies of the dominant allele
Why

Both copies of the gene must carry the recessive allele for this trait to appear.

GS010

A person's observable traits, such as height and eye color, make up the person's

  1. Agenotype
  2. Bphenotype
  3. Cgenome
  4. Dkaryotype
Why

Phenotype is the set of observable traits. Genotype is the genetic makeup that, with the environment, produces them.

GS011

Mitosis followed by cell division produces

  1. Afour cells with half the chromosomes
  2. Btwo cells with different genomes
  3. Ctwo daughter cells with identical genomes
  4. Done cell with twice the DNA
Why

In mitosis a cell copies its chromosomes and divides into two daughter cells with identical genomes. Meiosis makes cells with half the chromosomes.

GS012

Which human cells are haploid, with only one set of chromosomes?

  1. ASkin cells
  2. BMuscle cells
  3. CLiver cells
  4. DEgg and sperm cells
Why

Most human cells are diploid (two sets of chromosomes). Only the egg and sperm cells are haploid.

GS013

Most enzymes are proteins that

  1. Aspeed up a specific chemical reaction
  2. Bcarry oxygen in the blood
  3. Cstore the genetic code of the cell
  4. Dare the main fuel for the cell
Why

Enzymes speed up chemical reactions. Most are proteins, but some are RNA.

GS014

Proteins are built from chains of

  1. Afatty acids
  2. Bamino acids
  3. Csimple sugars
  4. Dnucleic acids
Why

Amino acids are the building blocks of proteins. There are 20 different amino acids.

GS015

According to the theory of evolution, which individuals tend to leave the most offspring?

  1. AThose that are the largest in size
  2. BThose that live apart from the group
  3. CThose best adapted to their surroundings
  4. DThose with no mutations at all
Why

Individuals best adapted to their surroundings leave more offspring, so their traits become more common over generations.

GS016

Blood carries oxygen from the lungs to the body tissues. Which gas does it carry from the tissues back to the lungs?

  1. ANitrogen
  2. BOxygen
  3. CHydrogen
  4. DCarbon dioxide
Why

Blood carries oxygen from the lungs to the tissues and carbon dioxide from the tissues back to the lungs.

61 more questions in this group are in the full course.

Unlock the Full Question Bank

Start a 2-day free trial to study every question and take full practice tests. Then $10/month for this course. Cancel anytime in your account. One free trial per person.

AR — Arithmetic Reasoning

80 questions · 15 on the exam · 64 held back

Practice

80 questions

AR001

Jada pays $3.40 for a pack of 4 batteries. At the same price for each battery, how much would 10 batteries cost?

  1. A$8.50
  2. B$0.85
  3. C$1.36
  4. D$9.40
Why

One costs $3.40 ÷ 4 = $0.85, so 10 cost 10 × $0.85 = $8.50.

AR002

A supply clerk orders 4 pairs of work gloves for $9.00. What would 6 pairs cost at the same price per pair?

  1. A$2.25
  2. B$13.50
  3. C$6.00
  4. D$11.00
Why

One costs $9.00 ÷ 4 = $2.25, so 6 cost 6 × $2.25 = $13.50.

AR003

A pair of hiking boots is marked $220.00. It goes on sale at 10% off. What is the sale price?

  1. A$22.00
  2. B$242.00
  3. C$198.00
  4. D$210.00
Why

The discount is 10% of $220.00 = $22.00; $220.00 − $22.00 = $198.00.

AR004

A store takes 40% off a tent that was priced at $150.00. How much does the tent cost now?

  1. A$60.00
  2. B$210.00
  3. C$110.00
  4. D$90.00
Why

The discount is 40% of $150.00 = $60.00; $150.00 − $60.00 = $90.00.

AR005

During a sale, every toolbox is 30% off. What do you pay for a toolbox with a regular price of $64.00?

  1. A$44.80
  2. B$19.20
  3. C$83.20
  4. D$34.00
Why

The discount is 30% of $64.00 = $19.20; $64.00 − $19.20 = $44.80.

AR006

Ryan earns $24.80 an hour. After a 5% raise, what is Ryan's new hourly pay?

  1. A$1.24
  2. B$26.04
  3. C$29.80
  4. D$23.56
Why

The raise is 5% of $24.80 = $1.24; $24.80 + $1.24 = $26.04.

AR007

A job that paid $16.00 an hour gets a 15% pay increase. What does it pay per hour now?

  1. A$2.40
  2. B$31.00
  3. C$18.40
  4. D$13.60
Why

The raise is 15% of $16.00 = $2.40; $16.00 + $2.40 = $18.40.

AR008

Owen buys a microwave oven priced at $120.00. The sales tax is 5%. What is the total cost with tax?

  1. A$6.00
  2. B$125.00
  3. C$180.00
  4. D$126.00
Why

The tax is 5% of $120.00 = $6.00; $120.00 + $6.00 = $126.00.

AR009

A set of tires costs $500.00 before tax. With a 7% sales tax added, what is the total?

  1. A$535.00
  2. B$35.00
  3. C$507.00
  4. D$850.00
Why

The tax is 7% of $500.00 = $35.00; $500.00 + $35.00 = $535.00.

AR010

A training class has 160 recruits, and 15% of them passed the swim test on the first try. How many did NOT pass on the first try?

  1. A24
  2. B136
  3. C145
  4. D85
Why

15% did, so 100% − 15% = 85% did not: 160 × 85 ÷ 100 = 136.

AR011

Of the 120 employees at a warehouse, 60% ride the bus to work. How many employees do not ride the bus?

  1. A72
  2. B60
  3. C48
  4. D40
Why

60% did, so 100% − 60% = 40% did not: 120 × 40 ÷ 100 = 48.

AR012

James answered 96 of 120 questions correctly on a practice test. What percent did James answer correctly?

  1. A20%
  2. B96%
  3. C8%
  4. D80%
Why

96 ÷ 120 = 0.8, and 0.8 × 100 = 80%.

AR013

A basketball player made 28 of 40 free throws this season. What percent of her free throws did she make?

  1. A70%
  2. B30%
  3. C28%
  4. D7%
Why

28 ÷ 40 = 0.7, and 0.7 × 100 = 70%.

AR014

A mechanic has finished 16 of the 25 steps on an inspection checklist. What percent of the checklist is done?

  1. A36%
  2. B64%
  3. C16%
  4. D6.4%
Why

16 ÷ 25 = 0.64, and 0.64 × 100 = 64%.

AR015

Jamal's scores on 6 quizzes were 87, 92, 99, 65, 97 and 82. What was the average (mean) score?

  1. A89.5
  2. B522
  3. C87
  4. D104.4
Why

Add the values (522) and divide by how many there are (6): 522 ÷ 6 = 87.

AR016

Over 6 days, a squad ran 90, 65, 95, 78, 84 and 68 laps of the track. What was the mean number of laps per day?

  1. A81
  2. B480
  3. C96
  4. D80
Why

Add the values (480) and divide by how many there are (6): 480 ÷ 6 = 80.

64 more questions in this group are in the full course.

Unlock the Full Question Bank

Start a 2-day free trial to study every question and take full practice tests. Then $10/month for this course. Cancel anytime in your account. One free trial per person.

WK — Word Knowledge

80 questions · 15 on the exam · 64 held back

Practice

80 questions

WK001

Abundant most nearly means

  1. Aplentiful
  2. Bfragile
  3. Chostile
  4. Dcostly
Why

Abundant means present in large amounts, more than enough: plentiful.

WK002

Candid most nearly means

  1. Atimid
  2. Bfrank
  3. Cweary
  4. Dloyal
Why

A candid person says openly what he or she thinks: frank, honest and direct.

WK003

Diligent most nearly means

  1. Acheerful
  2. Bcareless
  3. Chardworking
  4. Dwealthy
Why

Diligent means steady and careful in work or effort: hardworking. Careless is close to its opposite.

WK004

Frugal most nearly means

  1. Agenerous
  2. Bclumsy
  3. Chonest
  4. Dthrifty
Why

A frugal person spends little and avoids waste: thrifty.

WK005

Obsolete most nearly means

  1. Aoutdated
  2. Bexpensive
  3. Cfragile
  4. Dhidden
Why

Something obsolete is no longer used because something newer has replaced it: outdated.

WK006

Tedious most nearly means

  1. Adangerous
  2. Bboring
  3. Csimple
  4. Dbrief
Why

Tedious work is long, slow and dull: boring.

WK007

Vivid most nearly means

  1. Adamp
  2. Bgentle
  3. Cbright
  4. Dnarrow
Why

Vivid colors or images are strong and clear: bright.

WK008

Reluctant most nearly means

  1. Aeager
  2. Bable
  3. Cpolite
  4. Dunwilling
Why

Reluctant means not wanting to do something: unwilling. Eager is its opposite.

WK009

Hazardous most nearly means

  1. Aunsafe
  2. Bcostly
  3. Ccrowded
  4. Dlawful
Why

Hazardous means likely to cause harm: unsafe or dangerous.

WK010

Concise most nearly means

  1. Aloud
  2. Bbrief
  3. Ccorrect
  4. Dvague
Why

Concise writing or speech says a lot in few words: brief.

WK011

Ample most nearly means

  1. Anarrow
  2. Bsteep
  3. Csufficient
  4. Dshallow
Why

Ample means enough or more than enough: sufficient.

WK012

Feasible most nearly means

  1. Aillegal
  2. Bcostly
  3. Cfamous
  4. Dpossible
Why

A feasible plan is one that can be done: possible or workable.

WK013

Hinder most nearly means

  1. Aobstruct
  2. Bassist
  3. Crepeat
  4. Dmeasure
Why

To hinder is to get in the way of something: obstruct. Assist is its opposite.

WK014

Mend most nearly means

  1. Abend
  2. Brepair
  3. Cborrow
  4. Dpolish
Why

To mend something is to fix what is broken or torn: repair.

WK015

Commence most nearly means

  1. Afinish
  2. Bdelay
  3. Cbegin
  4. Dannounce
Why

To commence is to start: begin. Finish is its opposite.

WK016

Deteriorate most nearly means

  1. Aimprove
  2. Bexpand
  3. Cvanish
  4. Dworsen
Why

To deteriorate is to become worse in condition or quality: worsen.

64 more questions in this group are in the full course.

Unlock the Full Question Bank

Start a 2-day free trial to study every question and take full practice tests. Then $10/month for this course. Cancel anytime in your account. One free trial per person.

PC — Paragraph Comprehension

40 questions · 10 on the exam · 32 held back

Practice

40 questions

PC001

Honeybees live in colonies that can hold tens of thousands of insects. Each colony has a single queen, whose main job is to lay eggs. Worker bees, all of them female, do nearly everything else: they build wax comb, feed the young, guard the entrance, and gather nectar and pollen. Male bees, called drones, do not collect food; their only role is to mate with a queen from another colony. When a worker finds a good patch of flowers, she returns to the hive and performs a movement called the waggle dance. The angle and length of the dance tell other workers the direction and distance of the food. In this way, a single scout can recruit many helpers to a rich source of nectar.

According to the passage, what is the only role of drones?

  1. ATo mate with a queen from another colony
  2. BTo gather nectar and pollen
  3. CTo guard the hive entrance
  4. DTo lay eggs
Why

The passage says drones do not collect food and that their only role is to mate with a queen from another colony. The workers gather food and guard the hive; the queen lays eggs.

PC002

Honeybees live in colonies that can hold tens of thousands of insects. Each colony has a single queen, whose main job is to lay eggs. Worker bees, all of them female, do nearly everything else: they build wax comb, feed the young, guard the entrance, and gather nectar and pollen. Male bees, called drones, do not collect food; their only role is to mate with a queen from another colony. When a worker finds a good patch of flowers, she returns to the hive and performs a movement called the waggle dance. The angle and length of the dance tell other workers the direction and distance of the food. In this way, a single scout can recruit many helpers to a rich source of nectar.

According to the passage, what tells other workers the direction and distance of the food?

  1. AThe speed and loudness of the dance
  2. BThe angle and length of the dance
  3. CThe scent of the nectar the scout carries
  4. DThe number of times the scout circles the hive
Why

The passage states that the angle and length of the waggle dance tell other workers the direction and distance of the food.

PC003

Honeybees live in colonies that can hold tens of thousands of insects. Each colony has a single queen, whose main job is to lay eggs. Worker bees, all of them female, do nearly everything else: they build wax comb, feed the young, guard the entrance, and gather nectar and pollen. Male bees, called drones, do not collect food; their only role is to mate with a queen from another colony. When a worker finds a good patch of flowers, she returns to the hive and performs a movement called the waggle dance. The angle and length of the dance tell other workers the direction and distance of the food. In this way, a single scout can recruit many helpers to a rich source of nectar.

As used in the passage, the word 'recruit' means to

  1. Aenlist soldiers for an army
  2. Bhire workers for wages
  3. Cget others to join in as helpers
  4. Dbring back to good health
Why

The scout dances so that other workers will come and help gather nectar: to recruit is to get others to join in.

PC004

Before electric lights and satellite navigation, lighthouses guided ships along dangerous coasts. Early lighthouses burned wood or coal in open fires, which gave off smoke and a weak, flickering glow. In 1822 the French physicist Augustin Fresnel designed a lens made of many glass prisms arranged in rings. The prisms bent the light from a single lamp and gathered it into a strong, narrow beam. A large Fresnel lens could send its light more than twenty miles out to sea. Within a few decades, the design had spread to lighthouses around the world, and ships that once might have struck rocks at night reached harbor safely.

What did the prisms in a Fresnel lens do?

  1. ABurned coal more cleanly than open fires
  2. BMeasured the distance to passing ships
  3. CTurned the lamp on at sunset
  4. DBent the light from one lamp into a strong, narrow beam
Why

The passage states that the prisms bent the light from a single lamp and gathered it into a strong, narrow beam.

PC005

Before electric lights and satellite navigation, lighthouses guided ships along dangerous coasts. Early lighthouses burned wood or coal in open fires, which gave off smoke and a weak, flickering glow. In 1822 the French physicist Augustin Fresnel designed a lens made of many glass prisms arranged in rings. The prisms bent the light from a single lamp and gathered it into a strong, narrow beam. A large Fresnel lens could send its light more than twenty miles out to sea. Within a few decades, the design had spread to lighthouses around the world, and ships that once might have struck rocks at night reached harbor safely.

The passage suggests that the fires in early lighthouses

  1. Agave a light too weak to be seen from far out at sea
  2. Bwere brighter than a Fresnel lens
  3. Cgave off no smoke
  4. Dwere powered by electricity
Why

The early fires gave only a weak, flickering glow and smoke, while a Fresnel lens could send light more than twenty miles.

PC006

Before electric lights and satellite navigation, lighthouses guided ships along dangerous coasts. Early lighthouses burned wood or coal in open fires, which gave off smoke and a weak, flickering glow. In 1822 the French physicist Augustin Fresnel designed a lens made of many glass prisms arranged in rings. The prisms bent the light from a single lamp and gathered it into a strong, narrow beam. A large Fresnel lens could send its light more than twenty miles out to sea. Within a few decades, the design had spread to lighthouses around the world, and ships that once might have struck rocks at night reached harbor safely.

What is the main idea of the passage?

  1. ACoal was the best fuel for lighthouses
  2. BThe Fresnel lens made lighthouses far better at guiding ships safely
  3. CSatellite navigation has replaced every lighthouse
  4. DAugustin Fresnel was a famous ship captain
Why

The passage describes the weak early lights, explains how the Fresnel lens worked, and ends by saying the design spread worldwide and ships reached harbor safely.

PC007

Sleep is not simply a time when the body shuts down. During sleep, the brain cycles through several stages, including deep sleep and rapid eye movement (REM) sleep, when most vivid dreaming takes place. Research suggests that sleep helps the brain store memories and clear away waste products that build up during the day. Adults who regularly sleep less than seven hours a night are more likely to have trouble concentrating and to get sick. Teenagers need even more sleep than adults, yet many get far less because of early school start times and late-night use of phones and computers.

Which statement best expresses the main idea of the passage?

  1. AMost dreaming happens during deep sleep
  2. BTeenagers need less sleep than adults
  3. CSleep is an active time that the brain and body need
  4. DPhones are the main cause of illness
Why

The passage opens by saying sleep is not just a time when the body shuts down, then shows what the brain does during sleep and what happens without enough of it.

PC008

Sleep is not simply a time when the body shuts down. During sleep, the brain cycles through several stages, including deep sleep and rapid eye movement (REM) sleep, when most vivid dreaming takes place. Research suggests that sleep helps the brain store memories and clear away waste products that build up during the day. Adults who regularly sleep less than seven hours a night are more likely to have trouble concentrating and to get sick. Teenagers need even more sleep than adults, yet many get far less because of early school start times and late-night use of phones and computers.

According to the passage, most vivid dreaming takes place during

  1. Adeep sleep
  2. Bthe first minutes of sleep
  3. Cdaytime naps
  4. DREM sleep
Why

The passage names rapid eye movement (REM) sleep as the stage when most vivid dreaming takes place.

32 more questions in this group are in the full course.

Unlock the Full Question Bank

Start a 2-day free trial to study every question and take full practice tests. Then $10/month for this course. Cancel anytime in your account. One free trial per person.

MK — Mathematics Knowledge

80 questions · 15 on the exam · 64 held back

Practice

80 questions

MK001

What is 1/2 + 9/10?

  1. A1 2/5
  2. B5/6
  3. C1/2
  4. D9/20
Why

Use the common denominator 10: 5/10 + 9/10 = 14/10 = 1 2/5.

MK002

Add and simplify: 1/5 + 3/8

  1. A4/13
  2. B23/40
  3. C1/10
  4. D3/40
Why

Use the common denominator 40: 8/40 + 15/40 = 23/40.

MK003

What is 5 1/2 − 2 7/8?

  1. A3 3/8
  2. B1 5/8
  3. C2 5/8
  4. D3 5/8
Why

Write both as improper fractions: 11/2 − 23/8 = 2 5/8. (1/2 is less than 7/8, so you must borrow 1 from the 5.)

MK004

Subtract: 7 1/2 − 2 5/6

  1. A5 1/3
  2. B3 2/3
  3. C5 2/3
  4. D4 2/3
Why

Write both as improper fractions: 15/2 − 17/6 = 4 2/3. (1/2 is less than 5/6, so you must borrow 1 from the 7.)

MK005

What is 5/8 × 4/15?

  1. A1/6
  2. B9/23
  3. C2 11/32
  4. D20/23
Why

Multiply the tops and the bottoms: (5 × 4)/(8 × 15) = 20/120 = 1/6.

MK006

Find the product of 1/3 and 4/9.

  1. A5/12
  2. B4/27
  3. C3/4
  4. D1/3
Why

Multiply the tops and the bottoms: (1 × 4)/(3 × 9) = 4/27.

MK007

What is 3/8 ÷ 3/2?

  1. A9/16
  2. B4
  3. C1/4
  4. D3/5
Why

Dividing by a fraction is multiplying by its reciprocal: 3/8 × 2/3 = 1/4.

MK008

Divide: 1/2 ÷ 3/7

  1. A3/14
  2. B6/7
  3. C4/9
  4. D1 1/6
Why

Dividing by a fraction is multiplying by its reciprocal: 1/2 × 7/3 = 1 1/6.

MK009

What is 0.3 × 0.12?

  1. A0.036
  2. B0.36
  3. C0.0036
  4. D0.42
Why

Multiply 3 × 12 = 36, then count 1 + 2 = 3 decimal places: 0.036.

MK010

Multiply: 0.2 × 0.45

  1. A0.9
  2. B0.09
  3. C0.009
  4. D0.65
Why

Multiply 2 × 45 = 90, then count 1 + 2 = 3 decimal places: 0.09.

MK011

What is 1.2 ÷ 0.04?

  1. A3
  2. B300
  3. C30
  4. D0.3
Why

Move both decimal points two places right: 120 ÷ 4 = 30.

MK012

Divide: 5.4 ÷ 0.09

  1. A6
  2. B600
  3. C0.6
  4. D60
Why

Move both decimal points two places right: 540 ÷ 9 = 60.

MK013

What is 10 + 24 ÷ 2 × 3 − 3²?

  1. A37
  2. B42
  3. C5
  4. D40
Why

Exponents first (3² = 9), then ÷ and × from left to right (24 ÷ 2 × 3 = 36), then + and −: 10 + 36 − 9 = 37.

MK014

Evaluate: 10 + 12 ÷ 3 × 4 − 3²

  1. A20 1/3
  2. B17
  3. C2
  4. D20
Why

Exponents first (3² = 9), then ÷ and × from left to right (12 ÷ 3 × 4 = 16), then + and −: 10 + 16 − 9 = 17.

MK015

What is 5³ − 6²?

  1. A3
  2. B161
  3. C89
  4. D113
Why

5³ = 125 and 6² = 36, so 125 − 36 = 89.

MK016

Evaluate 2⁷ − 3³.

  1. A5
  2. B155
  3. C119
  4. D101
Why

2⁷ = 128 and 3³ = 27, so 128 − 27 = 101.

64 more questions in this group are in the full course.

Unlock the Full Question Bank

Start a 2-day free trial to study every question and take full practice tests. Then $10/month for this course. Cancel anytime in your account. One free trial per person.

EI — Electronics Information

62 questions · 15 on the exam · 49 held back

Practice

62 questions

EI001

The voltage across a resistor is doubled and the resistance does not change. The current through the resistor

  1. Adoubles
  2. Bis cut in half
  3. Cstays the same
  4. Dbecomes four times as large
Why

Ohm's law: with resistance constant, current changes in the same proportion as voltage. Twice the voltage gives twice the current.

EI002

In a circuit with a fixed voltage, the resistance is doubled. The current becomes

  1. Atwice the original value
  2. Bhalf the original value
  3. Cfour times the original value
  4. Dthe same as before
Why

Current equals voltage divided by resistance. With the voltage fixed, doubling the resistance halves the current.

EI003

A 12-volt battery is connected to a 10-ohm resistor and a 30-ohm resistor in series. What is the current in the circuit?

  1. A0.4 ampere
  2. B3 amperes
  3. C0.3 ampere
  4. D1.6 amperes
Why

Series resistances add: 10 + 30 = 40 ohms. Current = voltage / resistance = 12 / 40 = 0.3 ampere.

EI004

Which describes how to use Ohm's law to find the current (I) in a circuit?

  1. AMultiply the voltage by the resistance
  2. BDivide the resistance by the voltage
  3. CAdd the voltage and the resistance
  4. DDivide the voltage by the resistance
Why

Ohm's law written for current is I = E / R: current equals voltage divided by resistance.

EI005

Electrical resistance is measured in units called

  1. Athe ohm
  2. Bthe ampere
  3. Cthe volt
  4. Dthe watt
Why

Resistance is measured in ohms (symbol omega). Amperes measure current, volts measure voltage and watts measure power.

EI006

One ampere of current is 1 coulomb of electric charge passing a point in

  1. A1 minute
  2. B1 second
  3. C1 hour
  4. D1 millisecond
Why

One ampere is a flow of 1 coulomb of charge per second.

EI007

Which of these materials is one of the best conductors of electricity?

  1. AGlass
  2. BRubber
  3. CSilver
  4. DCeramic
Why

Silver, copper, gold and aluminum are the best conductors. Glass, rubber and ceramics are insulators.

EI008

Which material is usually used as an insulator?

  1. ACopper
  2. BAluminum
  3. CGold
  4. DPlastic
Why

Rubber, glass, ceramics and plastics conduct so poorly that they are used as insulators. Copper, aluminum and gold are good conductors.

EI009

Two copper wires have the same diameter, but one is twice as long as the other. Compared with the short wire, the long wire has

  1. Amore resistance
  2. Bless resistance
  3. Cthe same resistance
  4. Dno resistance
Why

The resistance of a wire is directly proportional to its length: a longer wire of the same size has more resistance.

EI010

If the cross-sectional area of a wire is doubled, its resistance is

  1. Adoubled
  2. Bcut in half
  3. Cmade four times larger
  4. Dnot changed
Why

Resistance varies inversely with cross-sectional area. Double the area and the resistance is cut in half.

EI011

As most metal conductors get hotter, their resistance

  1. Adecreases
  2. Bdrops to zero
  3. Cincreases
  4. Ddoes not change
Why

Most conductor materials increase in resistance as their temperature increases. Carbon is one of the few exceptions.

EI012

In the American wire gauge (AWG) system, a smaller gauge number means the wire has

  1. Aa smaller cross-sectional area
  2. Ba higher resistance per foot
  3. Ca thinner insulation layer
  4. Da larger cross-sectional area
Why

Each decrease of one gauge number means a larger cross-sectional area, so a lower gauge number is a thicker wire with less resistance.

EI013

In a series circuit, the current through each resistor is

  1. Athe same at every point
  2. Blargest at the first resistor
  3. Clargest at the largest resistor
  4. Dsmallest next to the battery
Why

A series circuit has only one path, so the same current flows through every element and at every point.

49 more questions in this group are in the full course.

Unlock the Full Question Bank

Start a 2-day free trial to study every question and take full practice tests. Then $10/month for this course. Cancel anytime in your account. One free trial per person.

AI — Auto Information

40 questions · 10 on the exam · 32 held back

Practice

40 questions

AI001

In a four-stroke engine, during which stroke are the burned gases pushed out of the cylinder?

  1. AExhaust stroke
  2. BIntake stroke
  3. CCompression stroke
  4. DPower stroke
Why

After the power stroke the piston moves back up on the exhaust stroke and pushes the burned gases out through the exhaust port.

AI002

What happens inside the cylinder as the piston moves down on the intake stroke?

  1. AThe pressure in the cylinder rises sharply
  2. BThe pressure in the cylinder is reduced, so air flows in
  3. CThe air-fuel mixture is ignited by a spark
  4. DThe burned gases are pushed out of the cylinder
Why

As the piston moves down on the intake stroke, the pressure in the cylinder drops, and air at atmospheric pressure flows in with its fuel.

AI003

On the compression stroke, the piston moves upward and

  1. Adraws in the air-fuel mixture
  2. Bpushes out the exhaust gases
  3. Csqueezes the air-fuel mixture
  4. Dcools the cylinder walls
Why

With the intake valve closed, the piston moves up and compresses (squeezes) the air-fuel mixture so that it burns well when it is ignited.

AI004

In a gasoline engine, the air-fuel mixture is ignited by

  1. Athe heat of compression alone
  2. Bthe fuel pump
  3. Cthe exhaust valve
  4. Da spark from the spark plug
Why

A gasoline engine is spark-ignited: the spark plug fires a spark in the combustion chamber. Ignition by the heat of compression alone is how a diesel works.

AI005

In a diesel engine, what ignites the fuel?

  1. AThe high pressure and temperature of the compressed air
  2. BA spark from a spark plug
  3. CA flame from a pilot light
  4. DAn electric arc in the fuel injector
Why

A diesel compresses air until it is very hot, then sprays in fuel. The high pressure and temperature make the fuel burn without a spark.

AI006

The crankshaft changes the up-and-down motion of the pistons into

  1. Asliding motion
  2. Brotary motion
  3. Celectrical energy
  4. Dhydraulic pressure
Why

The crankshaft turns the reciprocating (back-and-forth) motion of the pistons and connecting rods into rotary motion.

AI007

Which part connects the piston to the crankshaft?

  1. ACamshaft
  2. BPush rod
  3. CConnecting rod
  4. DRocker arm
Why

The connecting rod is the link between the piston and the crankshaft. The camshaft, push rods and rocker arms operate the valves.

AI008

What is the main job of the piston rings?

  1. ATo open and close the intake and exhaust valves
  2. BTo connect the piston to the crankshaft
  3. CTo carry the spark into the combustion chamber
  4. DTo seal gas pressure in the combustion chamber and keep oil out
Why

Piston rings press against the cylinder wall. They keep the gas pressure in the combustion chamber and keep oil from seeping into it.

32 more questions in this group are in the full course.

Unlock the Full Question Bank

Start a 2-day free trial to study every question and take full practice tests. Then $10/month for this course. Cancel anytime in your account. One free trial per person.

SI — Shop Information

40 questions · 10 on the exam · 32 held back

Practice

40 questions

SI001

A soft-faced hammer, with a striking face of rubber, plastic or brass, is meant for

  1. Aforming soft metal and striking surfaces that are easily damaged
  2. Bdriving nails into hardwood
  3. Cstriking the head of a center punch
  4. Dbreaking up concrete
Why

Soft-faced hammers are for forming soft metals and striking surfaces that mark easily. They should not be used on punch heads, bolts or nails.

SI002

Which tool should be used to strike a wood chisel?

  1. AA ball-peen hammer
  2. BA wooden mallet
  3. CA sledgehammer
  4. DA tack hammer
Why

A wood chisel or gouge is driven with a wooden mallet, which will not damage the chisel handle.

SI003

A flat-blade (common) screwdriver should fill at least how much of the screw slot?

  1. A25 percent
  2. B40 percent
  3. C75 percent
  4. D50 percent
Why

The blade must fill at least 75 percent of the slot. A blade that is too small cuts and burrs the slot and may slip.

SI004

Why should you never use a screwdriver to check an electric circuit?

  1. AThe handle will carry heat to your hand
  2. BThe screwdriver will become magnetized
  3. CThe circuit breaker cannot trip while a tool touches it
  4. DAn electric arc can burn the tip and ruin it
Why

An electric arc burns the screwdriver tip and makes it useless; it can even fuse the blade to the part and cause a short circuit.

SI005

The size of a pair of pliers refers to its

  1. Aoverall length
  2. Bjaw width
  3. Chandle thickness
  4. Dweight
Why

Pliers are sized by overall length, usually from 5 to 12 inches.

SI006

Needle-nose pliers are best for

  1. Aturning large nuts and bolts
  2. Bholding small objects and making adjustments in tight places
  3. Ccutting heavy bolts
  4. Dcrimping sheet metal seams
Why

Needle-nose pliers have long, thin jaws for holding objects and making adjustments in tight places. Pliers should not be used to turn nuts.

SI007

Diagonal cutting pliers ('dikes') are used to

  1. Atighten nuts and bolts
  2. Bbend sheet metal into curves
  3. Ccut wire, small screws and cotter pins
  4. Dmeasure wire diameter
Why

Diagonal pliers are short-jawed cutters. They cut wire, rivets, small screws and cotter pins.

SI008

A center punch is used to

  1. Adrive out stuck pins and bolts
  2. Bcut holes in sheet metal
  3. Cremove burrs from a cut edge
  4. Dmake an indentation in metal to start a drill
Why

A center punch makes the dent that keeps a twist drill from wandering when the hole is started. It should never be used to drive pins out of holes.

32 more questions in this group are in the full course.

Unlock the Full Question Bank

Start a 2-day free trial to study every question and take full practice tests. Then $10/month for this course. Cancel anytime in your account. One free trial per person.

MC — Mechanical Comprehension

62 questions · 15 on the exam · 49 held back

Practice

62 questions

MC001

The pulley, the wheel and axle, and gears all work on the principle of the

  1. Alever
  2. Binclined plane
  3. Cscrew
  4. Dwedge
Why

Physicists recognize two basic machine principles. Pulleys, the wheel and axle, and gears work like levers.

MC002

A screw works on the same principle as

  1. Athe lever
  2. Bthe inclined plane
  3. Cthe pulley
  4. Dthe wheel and axle
Why

A screw thread is an inclined plane wrapped around a shaft. The wedge and the screw both use the inclined-plane principle.

MC003

Mechanical advantage is a comparison of

  1. Ainput work to output time
  2. Boutput power to input voltage
  3. Coutput force to input force
  4. Dmass to volume
Why

Mechanical advantage compares the output force with the input force (or output distance with input distance).

MC004

A machine gives a mechanical advantage in force. What must be given up?

  1. ANothing: the work output is greater than the input
  2. BDirection: the load always moves sideways
  3. CWeight: the load becomes lighter
  4. DDistance: the effort moves farther than the load
Why

A machine cannot put out more work than is put in. If it gains force, it loses distance: the effort must move farther than the load.

MC005

The pivot point of a lever is called the

  1. Afulcrum
  2. Beffort arm
  3. Cresistance
  4. Dload arm
Why

Every lever has a fulcrum (the pivot), an effort and a resistance (the load).

MC006

In a first-class lever, where is the fulcrum?

  1. AAt one end, with the resistance in the middle
  2. BBetween the effort and the resistance
  3. CAt one end, with the effort in the middle
  4. DPast the resistance, at the far end
Why

In a first-class lever (such as a seesaw), the fulcrum is between the effort and the resistance.

MC007

Crowbars, shears and pliers are examples of which class of lever?

  1. ASecond class
  2. BThird class
  3. CFirst class
  4. DThey are not levers
Why

Crowbars, shears and pliers, like the seesaw, are first-class levers: the fulcrum is between the effort and the load.

MC008

You use a crowbar to lift a heavy rock. To lift it with less effort, you should

  1. Apush closer to the fulcrum
  2. Bmove the fulcrum away from the rock
  3. Cuse a shorter bar
  4. Dpush farther from the fulcrum
Why

A longer effort arm compared with the resistance arm increases the mechanical advantage, so pushing farther from the fulcrum takes less effort.

MC009

A first-class lever lifts a 500-lb weight that is 12 inches from the fulcrum. The effort is applied 60 inches from the fulcrum. How much effort is needed?

  1. A100 lb
  2. B2,500 lb
  3. C41.7 lb
  4. D250 lb
Why

Effort x effort arm = resistance x resistance arm: E x 60 = 500 x 12, so E = 6,000 / 60 = 100 lb.

MC010

A lever has a mechanical advantage of 5. If the effort end moves down 10 inches, how far does the load move up?

  1. A5 inches
  2. B2 inches
  3. C10 inches
  4. D50 inches
Why

A lever that multiplies force by 5 moves the load only one-fifth as far as the effort: 10 / 5 = 2 inches.

MC011

A wheelbarrow is an example of which class of lever?

  1. AFirst class
  2. BThird class
  3. CSecond class
  4. DIt is not a lever
Why

In a wheelbarrow the wheel is the fulcrum at one end, the effort is at the handles, and the load is in between: a second-class lever.

MC012

The handles of a wheelbarrow are 60 inches from the wheel axle. A 300-lb load sits 18 inches from the axle. How much lifting force is needed at the handles?

  1. A1,000 lb
  2. B100 lb
  3. C300 lb
  4. D90 lb
Why

E x 60 = 300 x 18, so E = 5,400 / 60 = 90 lb.

MC013

In a third-class lever, the effort is applied

  1. Abetween the fulcrum and the resistance
  2. Bon the far side of the resistance
  3. Cdirectly at the fulcrum
  4. Don the opposite side of the fulcrum from the load
Why

In a third-class lever the effort is between the fulcrum and the load. (Fulcrum between effort and load is a first-class lever.)

49 more questions in this group are in the full course.

Unlock the Full Question Bank

Start a 2-day free trial to study every question and take full practice tests. Then $10/month for this course. Cancel anytime in your account. One free trial per person.

End of the free questions

You Have Read All 114 Free Questions

The other 447 are in the full course, with Study mode and the full practice test on every one of them. Month to month: cancel any time, and you keep access until the end of the month you paid for.